Motors
DC motors, stepper motors, Serov motors and linear actuators
Description:
Description:
Item Name: MG90S servo
Weight: about 13.4g
Dimension: 22.8 x 12.2 x 28.5mm
Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)
Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)
Operating Voltage: 4.8-6.0V
Motor Type: coreless motor
Connector Wire Length : 175mm
Features:
Micro size
Great for truck, Boat, Racing Car, Helicopter and Airplane
Package Included:
1 x MG90S servo
Price: $16.99
Description:
For application which demand the high Torque which the lower end Servos fail to provide. This High Torque servo provides 25KG/cm torque and is an Hercules among the servos.
Inside the servo is precision Metal Gears and high accuracy control electronics for precise control.
The middle shell is made of CNC Aluminium and has a water tight design. Quality of build is given a lot of consideration for this model and it is matched with supreme performance
required for heavy RC use and high Torque applications, where the lower end Servos fail to deliver this model excels.
The Servo also comes with a 25T adjustable Metal Servo arm ( as shown in picture ).
Features:
Large torque - maximum torque can up to 25kg.cm
High-precision metal gear with hard anodizing for better accuracy and longer service life
CNC aluminium middle shell enhances heat dissipation
Water proof rubber seals screws, made of first-grade material ensure longevity
Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys
Great choice for university professors and students who are interested in developing software for robot parts
Tailored for RC hobbyist to provide great experience and precision control
Operating voltage: 6.5 - 6.8V
Operating speed ( 6.5V ): 0.15 sec/60 degree
Operating speed ( 6.8V ): 0.13 sec/60 degree
Stall torque ( 5.0V ): 21kg/cm
Stall torque ( 6.8V ): 25kg/cm
Dead band: 3μs
Working frequency: 50-333Hz
Connector wire: About 300mm
Gear type: Metal
Motor Type: DC motor
Size: 40 * 20 * 40.5mm
Weight: 67g
Package Included
1 x DS3225 25kg Digital Servo
1 x 25T Adjustable Metal Servo Arm
Misc Servo headers
Price: $49.00
Description:
If you have a project to control door or cabinet access with an microcontroller ( or Arduino ), This electronic solenoid lock would do the job for you.
This works on the principle of electromagnetism, wherein a DC current creates a magnetic field which moves the slug. To drive the solenoid you would need a power source which can give 12V @ 500mA. The below circuitry would help you get it going without problems:
Applications:
- Home Automation
- Cabinet locking
- Smart code locking doors
- Electronic door control for attendance systems
- Mobile control of door locks
Link to schematic to control the solenoid lock
Technical specs
- 12VDC (you can use 9-12 DC volts, but lower voltage results in weaker/slower operation)
- Draws 650mA at 12V, 500 mA at 9V when activated
- Designed for 1-10 seconds long activation time
- Max Dimensions: 27mm x 27mm x 17mm
- Wire length: 222.25mm / 8.75"
- Weight: 147.71g
Cabinet access control, door access control, arduino door control, lock solenoid, solenoid door lock, sliding door lock, electronic deadbolt, digital lock, gate lock, digital security lock, solenoid locks, door access control systems, single door access control, biometric access control, security access control
Price: $34.99
Description:
NEMA17 Stepper Motor, which is also called 42 Stepper motor. It is the standard Stepper motor used for Reprap or other 3D Printers. The wires are 400mm long.
Specs
Model #: 17HS4401
Features
- Smoother operation ( for finer 3D prints )
- Longer using life
- Lower noise
Step Angle ( Deg): 1.8 Deg
Motor Length (mm): 28mm
Rated current (A): 1.7 A
Phase Resistance (Ohm): 1.5 Ohm
Phase Inductance (mH): 2.8 mH
Holding Torque (N.cm min): 40 N.cm
Detent Torque (N.cm max): 2.2 N.cm
Rotor Inertia (g.cm2): 54 g.cm2
Lead Wire N0.: 4
Motor Weight (g): 280 g
Wire Color Phase
Red Phase A
Blue Phase A Return
Green Phase B
Black Phase B Return
Price: $34.99
Description:
A servo motor is a type of motor that can rotate with great precision. This is possible because the motor consists of a control circuit that provides feedback on the current position of the motor shaft, this feedback allows the servo motors to rotate with great precision.
If you want to rotate an object at some specific angles or distance, then you use a servo motor. It is just made up of a simple motor which runs through a servo mechanism. If motor is powered by a DC power supply then it is called DC servo motor, and if it is AC-powered motor then it is called AC servo motor. A servo motor usually comes with a gear arrangement that allows us to get a very high torque servo motor in small and lightweight packages. Due to these features, they are being used in many applications like toy car, RC helicopters and planes, Robotics, etc.
Applications:
- Cameras, telescopes and antennas
- Elevator technology
- Robotics
- RC boats & Cars
- Industrial production
Specs
Stable and Shock Proof. - Metal Gear - Double Ball Bearing - Connector Wire Length 300mm
Weight : 55g
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V
Stall Torque : 15 kg-cm (208.3 oz-in) at 6V
Gear Type: All Metal Gears
Spline diameter: 5.8 mm
Movement: 0-180 Deg
Price: $29.99
Zircon - This is a contributing Drupal Theme
WeebPal
